What should we pay attention to when cleaning the LCD module?

Blaze Display Technology Co., Ltd. | Updated: Nov 27, 2018

The popularization of electronic technology has also allowed the rapid development of liquid crystal display modules. There are many things we should pay attention to when cleaning the LCD screen. Today we will tell you a few points, and I hope you can use it flexibly.

 

1. Clean the LCD screen with a dust-free cloth or cotton swab. Do not use clean water to clean the LCD screen. When cleaned with clean water, the liquid can easily drip into the inside of the LCD screen, which will cause a short circuit in the device circuit and burn out expensive electronic equipment. Do not use ordinary soft cloths (such as glasses cloth) or paper towels to wipe the LCD screen. For soft LCD screens, their surface is still too rough and it is easy to scratch the delicate LCD screen.

 

2. When cleaning the LCD screen, do not use any alkaline solution or chemical solution to wipe the surface of the screen at will. There are two types of smudges on the LCD panel. One is the dust in the air accumulated over time, and the other is the fingerprints and oil stains left by the user inadvertently. It is easy to correct it if you do not pay attention when cleaning the LCD screen. The liquid crystal causes damage.

 

3. Do not use alcohol and other chemical solvents to clean the LCD screen. Current LCD screens are coated with a special coating on the screen. Once the display screen is wiped with alcohol, this special coating will be dissolved, which will adversely affect the display effect.